225/65R17 vs 225/60R18
225/60R18 is 0.11 in (0.40%) taller than 225/65R17. Edit either size below to try other combinations.
Metric (265/70R17) or inch (33x12.50R20). Axle ratio is used for the RPM table only.
225/60R18 is 0.11 in (3 mm) taller than 225/65R17 (+0.4%). With a speedometer calibrated for 225/65R17, an indicated 60 mph is really 60.2 mph. The diameter difference is within ±3%, a range often quoted as a rule of thumb for speedometer and gearing effects.
Geometry only: this does not confirm that a size fits, is approved for or is safe on a particular vehicle. Wheel width and offset, suspension, clearances, load index, speed rating, the vehicle maker's specification and local regulations all apply — check with your owner's manual and a qualified tire professional.
| 225/65R17 | 225/60R18 | Difference | |
|---|---|---|---|
| Diameter | 28.52 in | 28.63 in | +0.11 in (+0.40%) |
| Diameter (mm) | 724 mm | 727 mm | +3 mm |
| Width | 8.86 in | 8.86 in | ±0.00 in (±0 mm) |
| Sidewall | 5.76 in | 5.31 in | −0.44 in |
| Rim | 17 in | 18 in | +1.0 in |
| Circumference | 89.6 in | 89.9 in | +0.36 in |
| Revs per mile | 707 | 704 | −3 |
| Ground clearance change | — | — | +0.06 in |
Speedometer error
| Speedometer shows | True speed on 225/60R18 | Difference |
|---|---|---|
| 20 mph | 20.1 mph | +0.1 mph |
| 30 mph | 30.1 mph | +0.1 mph |
| 40 mph | 40.2 mph | +0.2 mph |
| 50 mph | 50.2 mph | +0.2 mph |
| 60 mph | 60.2 mph | +0.2 mph |
| 70 mph | 70.3 mph | +0.3 mph |
| 80 mph | 80.3 mph | +0.3 mph |
| Speedometer shows | True speed on 225/60R18 | Difference |
|---|---|---|
| 30 km/h | 30.1 km/h | +0.1 km/h |
| 50 km/h | 50.2 km/h | +0.2 km/h |
| 80 km/h | 80.3 km/h | +0.3 km/h |
| 100 km/h | 100.4 km/h | +0.4 km/h |
| 120 km/h | 120.5 km/h | +0.5 km/h |
Assumes the speedometer was accurate on 225/65R17. Factory speedometers often read slightly high on purpose; check against GPS.
Engine RPM and gearing
| Road speed | 225/65R17 | 225/60R18 | Change |
|---|---|---|---|
| 45 mph | 1,979 rpm | 1,971 rpm | −8 rpm |
| 55 mph | 2,418 rpm | 2,409 rpm | −9 rpm |
| 65 mph | 2,858 rpm | 2,847 rpm | −11 rpm |
| 75 mph | 3,298 rpm | 3,284 rpm | −14 rpm |
To restore the original effective gearing on 225/60R18 you would need an axle ratio of about 3.74 — practically the same as now. For overdrive gears multiply the RPM by the gear ratio (e.g. ×0.69).
Other 18-inch sizes within ±3% of 225/65R17
| Size | Diameter | Width | vs original |
|---|---|---|---|
| 205/65R18 | 28.49 in | 8.07 in | −0.08% |
| 335/40R18 | 28.55 in | 13.19 in | +0.12% |
| 295/45R18 | 28.45 in | 11.61 in | −0.22% |
| 265/50R18 | 28.43 in | 10.43 in | −0.29% |
| 245/55R18 | 28.61 in | 9.65 in | +0.33% |
| 225/60R18 | 28.63 in | 8.86 in | +0.40% |
| 165/80R18 | 28.39 in | 6.50 in | −0.43% |
| 155/85R18 | 28.37 in | 6.10 in | −0.50% |
Computed combinations of standard widths and aspect ratios; not every size is manufactured. A similar diameter does not mean a size fits or is approved for your vehicle.
What changes if you switch
- The 0.40% height difference is within ±3%, a range often quoted as a rule of thumb; a speedometer calibrated for 225/65R17 reads about 0.4% low.
- 225/60R18 is made for 18-inch wheels instead of 17-inch, so this is a wheel-and-tire change.
- Sidewall height goes from 5.76 in to 5.31 in. Shorter sidewalls generally flex less; ride and handling also depend on the tire's construction and pressure.
Size pages
Frequently asked questions
Is 225/60R18 bigger than 225/65R17?
225/60R18 is 0.11 in (3 mm, 0.40%) taller than 225/65R17.
Can I replace 225/65R17 with 225/60R18?
This page can only compare dimensions: the diameter difference is 0.40%, within the ±3% often quoted as a rule of thumb. It cannot tell you whether 225/60R18 fits or is approved for your vehicle — that depends on wheel width and offset, suspension and body clearance, the load index and speed rating your vehicle requires, and local regulations. Check your owner's manual and placard and ask a qualified tire professional.
How much does the speedometer change from 225/65R17 to 225/60R18?
It reads low by about 0.40% of the indicated speed: at an indicated 60 mph you are actually doing 60.2 mph (at 100 km/h, 100.4 km/h).
How does 225/60R18 change engine RPM?
Example with a 3.73 axle ratio in direct drive at 65 mph: 2858 rpm on 225/65R17 and 2847 rpm on 225/60R18. Restoring the original effective gearing would take an axle ratio of about 3.74. Enter your own axle ratio in the tool above; this is arithmetic, not a recommendation to change gears.
Nominal geometry for planning only; not fitment advice. See methodology.
Related tools
- Speedometer error calculator
How fast you are really going after a tire change.
- Gear ratio & RPM
Engine RPM and the regear needed for bigger tires.
- Plus size calculator
Sizes that keep your diameter on a bigger or smaller wheel.
- Inch ↔ metric converter
33x12.50R17 to metric and back, with closest equivalents.